Many people looking up how to prepare for the hemp ban want a practical next step. Federal hemp rules change in two steps: the first takes effect on November 12, 2026, and most of the rest follows on December 11, unless Congress acts again. The most useful preparation for a beverage brand is not a last-minute label change. It is potency testing, stability testing, and shelf-life data you can stand behind. BevForm can help you get that work in place.
The federal redefinition of hemp that Congress passed in November 2025 takes effect in two stages:
Starting November 12, 2026: Hemp-derived cannabinoid products that contain cannabinoids "not capable of being naturally produced" by the Cannabis sativa L. plant are no longer hemp under federal law.
Starting December 11, 2026, unless Congress acts again: The rest of the new definition applies. Hemp is measured by total THC, including THCA, with a 0.3% dry-weight limit. Cannabinoids made outside the plant are excluded even if the plant can produce them naturally. A finished hemp-derived product may contain no more than 0.4 milligrams combined total per container of total THC and other cannabinoids with similar effects. The law defines "container" as the innermost package in direct contact with the product, such as a can or bottle.
Several bills that would delay, replace, or repeal these changes are pending, but none has passed. For a beverage brand, though, the larger trend is clear whatever Congress does next: the market is moving toward verified testing. Brands that already have data will be in the strongest position.
Regulators, lawmakers, and industry are all calling for testing
The pressure comes from groups that often disagree with each other:
State attorneys general. On August 4, 2026, a bipartisan coalition of more than 30 state attorneys general wrote to congressional leaders. They urged Congress not to delay or weaken the new hemp definition and warned against the return of "unregulated intoxicating hemp products."
The FDA. In January 2023, the FDA concluded that existing food and dietary-supplement rules are not suited to CBD and called for a new regulatory pathway. The safeguards it listed include clear labels, prevention of contaminants, and limits on content.
Congress. The bipartisan Lawful Hemp Protection Act (H.R. 9830), introduced in July 2026, would regulate hemp products rather than ban them. According to its sponsor, it would require testing at the finished-product level and throughout the manufacturing chain.
Standards groups. ASTM International has opened a work item for a proposed guide to a stability testing protocol that estimates cannabinoid beverage shelf life (WK95157).
The hemp industry itself. The U.S. Hemp Roundtable is asking supporters to press their attorneys general for federal rules that include a 21+ age limit, child-safe packaging, and lab testing.
The parties disagree on THC limits, but they agree on testing. A brand that starts now does not have to wait for the rules to settle.
Test for compliance, and test for potency
A compliance panel answers one question: is this batch safe and within the rules? Michigan's licensed cannabis program shows what a thorough panel includes. Under the state's testing rule, laboratories test for:
Potency (total THC, THCA, total CBD, and CBDA)
Foreign matter
Microbial contaminants
Chemical residues such as pesticides
Heavy metals
Residual solvents for infused products
Mycotoxins when the agency requests them
Licensed beverages also get terpene, homogeneity, and pH testing.
Potency needs its own attention, because a label claim is only as good as the data behind it. A can that tests at its labeled dose on the day it is filled can test lower months later. Consumers drink it in month six, not on day one.
Why cannabinoid drinks lose potency
Cannabinoids are oily molecules carried in a water-based drink, usually in an emulsion. Research and Michigan's regulators point to several ways potency drops:
Oxidation and oxygen ingress. A classic 1976 study in the Journal of Pharmacy and Pharmacology found that air oxidation caused significant cannabinoid losses, and that THC lost to oxidation in the dark shows up as cannabinol (CBN). Michigan's Cannabis Regulatory Agency (CRA) lists oxygen ingress as one cause of THC changes in beverages.
Light. The same study identified light as the single greatest cause of cannabinoid loss, especially in solutions. A 2022 study in Food & Function found that light exposure and acidity were the two main factors affecting CBD stability in nanoemulsions.
Heat and pH. A 2022 study in Cannabis and Cannabinoid Research found that CBD and Δ9-THC degraded faster at higher temperatures and in acidic solutions. Storage and transport temperatures matter, and so does the drink's acidity.
Chemical conversion. Under acidic conditions, CBD can convert into Δ9-THC and Δ8-THC, as a 2020 review in Toxics documents. A beverage built near a THC limit should track THC isomers over its shelf life, not only at release.
Emulsion breakdown. A 2021 study in the Journal of Cannabis Research found that measured potency fell whenever the emulsion's physical stability changed. Very low pH and high salt levels caused phase separation.
Scalping into packaging. Cannabinoid droplets can stick to the polymer liner inside a can. The Michigan CRA names "leaching (scalping)" as a cause of THC loss. In one lined-can test published in a 2022 patent application, CBD fell by about half at 20 weeks, and most of the missing CBD was recovered from the liner.
All of these can be designed around through formulation, dissolved-oxygen control, packaging, and storage, but only data collected over time confirms it.
Stand behind the shelf life you print
A best-by date is a promise to the consumer that the drink will taste right and deliver the experience on the label until that date. Michigan writes that promise into its rules for licensed infused beverages. According to the CRA, "it is the responsibility of the processor to ensure that the marijuana-infused beverages they manufacture are compliant and remain compliant throughout their entire shelf-life."
Michigan's beverage requirements spell out what that takes:
Approval first. A Research and Development Project must be approved before production, and it must mimic real production, packaging, transport, and storage conditions.
Potency limits. In a closed beverage, total THC may not move more than ±15% from its initial potency and must stay within ±10% of the labeled potency.
Shelf life. The expiration date can only be as long as the data supports, with a maximum of 12 months.
Real-time confirmation. Accelerated results must be confirmed by a real-time study.
Federal hemp law sets no equivalent shelf-life standard, but holding a hemp beverage to the same discipline is the most reliable way to give consumers the experience they expect.
Why Michigan data is a strong place to start
Michigan's cannabis testing framework is widely regarded as one of the more comprehensive in the country. An MLive investigation noted that Michigan screens for dozens of pesticide chemicals and several heavy metals. It also noted that some states set stricter limits on individual tests. Illinois, for example, has a tighter yeast-and-mold limit.
A formula that holds up against a full Michigan panel and a Michigan-style shelf-life study is a strong technical starting point.
Put every test you may need into the first study
Plan the analyte list before the first sample is pulled. Adding a test to a stability study that is already scheduled usually costs far less than discovering a gap later.
Michigan's rules show how expensive a gap can be:
Changing laboratories. A brand that changes laboratories partway through must notify the CRA and start a new study.
Reformulating. If the data shows the formula needs reformulation, the brand must file a new beverage application with a new study plan.
Waiting on real-time data. Real-time data takes as long as the shelf life being claimed, so a restart can cost months, not days.
A practical checklist:
Choose a laboratory that can run every test you need for the life of the study.
Test for potency, including THC isomers and CBN, plus the full safety panel at release.
Report potency per container as well as per serving, and confirm the lab's method can measure accurately at the levels you need.
Track pH, emulsion stability, appearance, flavor, and carbonation at each time point.
Store samples in the final package under realistic conditions, both ambient and refrigerated if that applies.
Set acceptance limits and corrective actions in writing before the study begins.
How BevForm helps
BevForm has deep experience in cannabis beverage formulation and stability work. That includes formulation work to help products maintain compliant, consistent potency throughout their labeled shelf life. We help brands:
Develop flavor systems and formulas for cannabis beverages with dosing consistency and shelf life in mind
Plan accelerated and real-time stability testing, including potency testing, with a complete analyte list from the start
Provide stability consultation on what to test and how to read the results
Support stability reformulation when the data shows the formula needs to change
Prepare production-ready specifications for manufacturing partners
We work alongside Michigan licensed canning partners such as Emerald Canning Partners. Our focus is the quality side: planning stability testing, coordinating with laboratories, and working within Michigan's regulatory requirements.
If you are preparing for the hemp rule changes, this is the work to start now. Learn more about BevForm's beverage stability testing, or get in touch to plan a study.
Planning a stability study, a stability consultation, or a compliance review? Start a project →
Sources
U.S. Government Publishing Office: Public Law 119-37, Sec. 781 (Nov. 12, 2025) and Public Law 119-103, Sec. 2019 (Sept. 2, 2026)
Congressional Research Service: Delay in Changes to Hemp Definition, LSB11496 (Oct. 28, 2026) and Changes to the Statutory Definition of Hemp, IF13136
State attorneys general: Letter to Congress on hemp (Aug. 4, 2026)
Office of Rep. Andy Barr: Lawful Hemp Protection Act (July 2026)
ASTM International: WK95157, proposed guide for a cannabinoid beverage stability testing protocol
U.S. Hemp Roundtable: Tell your Attorney General about hemp products
Michigan CRA: Process to Obtain Approval for Production of Marijuana-Infused Beverages (Dec. 2, 2025), Marijuana-Infused Beverages FAQ, and Sampling and Testing Technical Guidance (rev. Sept. 23, 2024)
Michigan Admin. Code: R 420.305, Testing; laboratory requirements
MLive: How safe is Michigan's $2 billion marijuana industry? (2022, updated 2024)
Fairbairn et al., J. Pharm. Pharmacol. (1976): The stability of cannabis and its preparations on storage
Jaidee et al., Cannabis and Cannabinoid Research (2022): Kinetics of CBD, Δ9-THC degradation and cannabinol formation
Zheng et al., Food & Function (2022): Physicochemical stability of CBD nanoemulsions
Golombek et al., Toxics (2020): Conversion of CBD into psychotropic cannabinoids
Banerjee et al., Journal of Cannabis Research (2021): Stress-testing a phytocannabinoid nanoemulsion
WIPO patent application WO2022066936A1 (2022): Systems for retaining potency in an infused beverage
This article is general information, not legal advice. Hemp and cannabis rules are changing quickly, and Congress may act before or after December 11, 2026. Confirm current requirements with counsel and the Michigan Cannabis Regulatory Agency before making product, labeling, or sales decisions.